Finden Sie Aluminiumtafel, 5083 Aluminiumblech, Aluminiumblech Für Öltankwagen auf Industry Directory, zuverlässige Hersteller / Lieferant / Fabrik aus China

Anfrage-Korb (0)
Home > Produkt-Liste > Aluminiumblech und -platte > Elektronische Anwendung 5005 Aluminiumblech

Elektronische Anwendung 5005 Aluminiumblech

Zahlungsart: L/C, T/T, D/P, Western Union
Minimum der Bestellmenge: 2
Lieferzeit: 1 Tage

Basisinformation

Modell:  5005

Produktbeschreibung

Modell Nr .: 5005 Anwendung: Transport Werkzeuge Grade: 5000 Serie Technik: Warmgewalzt Temper: O - H112 Oberfläche: Mühle Finish Spezifikation: China Standard HS Code: 7606129000 Typ: Aluminium Bleche Form: Flach Oberflächenbehandlung: Mühle Finish Legierung: Legierung Zertifizierung : ASTM, JIS, GB / T, EN, ASTMB Warenzeichen: HM Herkunft: China Electronic Application 5005 Aluminiumblech

Super breite Aluminiumplatte
Legierung: 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6082 usw. Electronic Application 5005 Aluminium Sheet
Electronic Application 5005 Aluminium SheetElectronic Application 5005 Aluminium Sheet Temper: H12. H14 H16 H18 H112 H22 H24 H26 H32 H34 H36 H38 O usw.
Dicke: 0,2 mm - 400 mm
Breite: Unter 2800mm
Länge: Unter 10000mm
Verpackung: Export Standard, Abdeckung mit braunem Papier und Kunststoff-Folie dann verpackt mit Stahlband & Holzkiste / Palette
Herkunft: China
Vorbereitungs- und Anlaufzeit: Innerhalb von 25 Tagen
Produktivität: 4000MT / Monat
Zahlung: T / T, unwiderrufliches L / C am Anblick
Bemerkungen: Spezifische Anforderung von Legierung, Temperament oder Spezifikation kann nach Ihrer Anfrage besprochen werden.
Aluminium Plate / Slab 5052
Typical Chemistry (% Maximum unless shown as a range)


Cu Si + Fe Mn Mg Zn Cr Al
0.10 0.45 0.10 2.2 / 2.8 0.10 0.15 / 0.35 Balance


Characteristics
5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades.
Typical Applications
5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing.
Mechanical Properties


  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
5052-0 28.0 196 13.0 91 25 47
5052-H32 33.0 231 28.0 196 12 60
5052-H34 38.0 266 31.0 217 10 68



Aluminium Plate / Slab 5083
Typical Chemistry (% Maximum unless shown as a range)


Cu Si Fe Mn Mg Zn Cr Ti Al
0.10 0.40 0.40 0.3 / 1.0 4.0 / 4.9 0.25 0.05 / 0.25 0.15 Balance


Characteristics
5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion.
Typical Applications
5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels.
Mechanical Properties


  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
5083-0 42 294 21 147 22 -
5083-H321 46 322 33 231 16 -



Aluminium Plate / Slab 6061
Typical Chemistry (% Maximum unless shown as a range)


Cu Si Fe Mn Mg Zn Cr Ti Al
0.15 / 0.40 0.4 / 0.8 0.70 0.15 0.80 / 1.2 0.25 0.04 / 0.35 0.15 Balance


Characteristics
6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration.
Typical Applications
6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.
Mechanical Properties


  Tensile Strength Yield Strength Elongation Brinell Hardness
  ksi MPa ksi MPa % in 2"
(50mm)
 
6061-0 18.0 126 8.0 56 25 30
6061-T4 34.0 238 22.0 154 21 65
6061-T6 (T651) 44.0 308 41.0 287 17 95

Produktgruppe : Aluminiumblech und -platte

Mail an Lieferanten
  • *Fach:
  • Um:

  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein